February 2023
These are the February 2023 release notes of NDD Orbix.
See a summary of all updates and click on the links to navigate each one.
FIXES
FIXES
IMPROVEMENTS
FIXES
FIXES
IMPROVEMENTS
IMPROVEMENTS
Complementation of the computer's summary properties indicator
Changing the way your computer's network interfaces indicator is displayed
February 14, 2023
Fixes
Error when exporting a custom report in CSV
How did the problem happen? I had an error when exporting a custom report in CSV.
When did the problem happen? When trying to export a custom report in CSV.
Where was the problem? In the menu Reports > Custom > Select report > Export > Export CSV.
What was done to fix it? Fixed so that exporting the custom report in CSV is performed without errors.
February 13, 2023
Fixes
Advanced filters "less than or equal" operator was not working correctly
How did the problem happen? The "less than or equal" operator in the advanced filters was not working correctly.
When did the problem happen? When using the "less than or equal" operator in the advanced filters.
Where was the problem? In grids that contain this operator option in the advanced filters ("Filters" option above the grid).
What was done to fix it? Updated the version of the component.
February 10, 2023
Improvements
Changing the display of some supply grid columns
What purpose? Facilitate user's visualization and understanding in the supplies screen and in the generation of supplies reports.
What was done? In the columns "Yield", "Coverage" and "Efficiency" will be informed as "Indeterminate" for supplies that are not generated these indicators by lack of capacity, instead of being informed as "-2". In addition, the values in the "Coverage" and "Efficiency" columns will be given two places after the comma, instead of three.
What will be affected? The columns "Yield", "Coverage" and "Efficiency" of the grids of the Supplies > Supplies running low and Supplies > Premature exchanges menus and of the standard and custom reports that refer to supplies.
What is the impact on the environment? There isn't one.
Observations? There isn't one.
Fixes
Printers captured by the NDD - Printer Monitor service did not appear in the portal
How did the problem happen? Printers captured by the NDD - Printer Monitor service did not appear in the NDD Orbix portal.
When did the problem happen? When you perform a new installation of the NDD - Printer Monitor service.
Where was the problem? In the menu grid Devices > Printers.
What was done to fix it? Corrected the creation of the agent on the server so that the printers collected by recently installed agents are sent and recognized by the NDD Orbix portal.
February 9, 2023
Fixes
Fixes to the standard and custom computer inventory report
How did the problem happen? When trying to generate a standard computer inventory report and filter by customer, the customers were not shown for selection, and in the custom reports, the option to generate a computer inventory report was not shown.
When did the problem happen? This occurred when trying to select a customer when filtering the standard computer inventory report, and also when trying to select the computer inventory report as a data source when creating the custom report.
Where was the problem? When filtering the report from the menu Reports > Standard > Computer inventory > Client filter and when creating the custom report from the menu Reports > Custom > Create > Data source field.
What was done to fix it? Fixed the customer data query in the standard computer inventory report filter and added computer inventory as data source option in custom report creation.
February 8, 2023
Improvements
Unifying supply settings
What purpose? Make it easier to navigate through settings that refer to supplies.
What was done? In the "Supplies" submenu of the "Settings" menu, all settings that refer to supplies have been inserted.
What will be affected? The settings for “Replenishment service”, “Alert for supply running out”, “Force capacity on supplies”, “Reprocess supplies”, “Automatic supply demand request”, “Customised demand statuses”, “Email rules”, “Exchanges for production” and “Premature exchanges” can be made in the Settings > Supplies menu.
What is the impact on the environment? There isn't one.
Observations? In the Settings > Supplies menu, a search filter has been added in the upper left corner, in order to facilitate the search for the desired setting.
Inclusion of printer IP link to open settings panel
What purpose? Make it easier for the customer to access the printer's settings.
What was done? Included a link in the printer's IP, which when the customer clicks, will open the settings panel.
What will be affected? The link is available in the "IP address" column of the Devices > Printers menu grid and in the "IP address" field of the "INFO" tab of the Devices > Printers > Select printer > Open menu.
What is the impact on the environment? There isn't one.
Observations? There isn't one.
Highlight the information that there are no reference meter rules enabled when creating email rules
What purpose? Highlight information when there are no reference meter rules enabled for the ISP when creating email rules and that there are no meters in the system because no reads were received from the printers when creating a rule for a reference meter.
What was done? Locked the meter checkboxes on the mail rule creation page if all meters are disabled. Blocked the fields to set the mathematical expression that will be used to calculate the meter if no readings are available on the rule creation page for each meter.
What will be affected? The e-mail rule creation in the Settings > Supplies > Email rules menu and the reference meter rule creation in the Settings > Reference meters menu.
What is the impact on the environment? There isn't one.
Observations? There isn't one.
February 2, 2023
Improvements
Identification of computers that are receiving data or not
What purpose? Facilitate the identification of computers that are or are not receiving data.
What was done? Included in the grid of Computers is the column "Status", which indicates as "Active" the computer that is receiving data or as "Inactive" the computer that has not received data for more than 7 days.
What will be affected? When you access the Devices > Computers menu, the indication of the status of the computer will be the first column of the grid, indicated with the color green for active computers and red for inactive computers.
What is the impact on the environment? There isn't one.
Observations? There isn't one.
Complementation of the computer's location indicator
What purpose? Supplement the computer summary screen with the computer's location indicator.
What was done? When opening the details of a computer, the computer's location indicator was included in the summary screen.
What will be affected? By accessing the Devices > Computers menu, selecting the desired computer and clicking the "Open" button, you can view, on the "SUMMARY" tab, the "Location" indicator, which indicates the approximate location of the computer, via map or satellite. By clicking on "See more", you will be directed to the "LOCATION" tab.
What is the impact on the environment? There isn't one.
Observations? There isn't one.
Complementation of the computer's summary properties indicator
What purpose? Complement the properties indicator in the computer summary screen.
What was done? When opening the details of a computer, an indication of its status and the last update date was included in the indicator of properties on the computer summary screen.
What will be affected? By accessing the Devices > Computers menu, selecting the desired computer and clicking on the "Open" button, it will be possible to see, on the "SUMMARY" tab and on the "Properties" indicator, the indication of whether the computer is active or inactive and information about the date of its last update.
What is the impact on the environment? There isn't one.
Observations? There isn't one.
Changing the way your computer's network interfaces indicator is displayed
What purpose? Make it easier to read and understand the information of the network interfaces indicator available in the computer's summary.
What was done? Changed the way the indicator information is displayed to a grid that comes sorted by the "Name" column, but can be reordered in ascending or descending order by any of the columns by clicking under their titles.
What will be affected? The "Network interfaces" indicator available in the "SUMMARY" tab of the Devices > Computers > Select computer > Open menu.
What is the impact on the environment? There isn't one.
Observations? There isn't one.
Computer summary indicators organization
What purpose? Organized the indicators displayed on the computer summary screen.
What was done? Changed the order of the indicators available on the computer summary screen to: Properties, Location, Processor usage, RAM memory usage, Volumes, Hardware and Network interfaces.
What will be affected? The "SUMMARY" tab in the Devices > Computers > Select computer > Open menu.
What is the impact on the environment? There isn't one.
Observations? There isn't one.